For ease of installation, look for these parts:
Block from Danger Den such as the Maze 3 ... easy to install unless you're retarded (I've never heard of someone having problems). Clearflex tubing with thick walls in 1/2". A radiator that will fit your case (you can find them anywhere, just don't get one with ANY aluminum in it). Hose clamps. Creatively glued PVC pieces to make a custom airtrap that fits your case (or just a fill tube ... doesn't matter much). A Danner Mag Drive 350 pump. There you go. Should be able to do it under $200. Get a Danger Den GPU block if you feel the need, though since most are 3/8" you'll need to consider using T splitters in your system and you'll need to pick up some 3/8" ID Clearflex as well. Don't worry about the HDDs ... that is a waste of money. You'll find a modified AMD stock HSF with a quiet 60mm fan will be almost inaudible in your system and will more than adequately cool your GPU.
If you really need further direction on the heatercore, look around this forum for recommendations, since they all are similar, or use the stickied heatercore database to find one to perfectly match your size requirements (be warned that the tank size is not included in the core sizes listed ... look at the pictures).
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|