what psu you guys recommend?
Well as i have just sold my Q-Tec 550W psu along with my epox 8rda3+ and xp1700 cpu, im wanting to start again, but with a good psu unit, the only problem i have is which one.
i have read the amandtech review about the psu's but i wondered if you guys and gals, could tell me what you are using.
i read in the review that the 3.3v and the 5v lines are the more important so i gather i have to have a good psu for those lines..
any sugguestions or comments?
thanks for the help!
ps. my plan is to buy a barton 2500+ and a nf7-s rev 2 board and use them with my corsair xms 3200LL memory (1 gig of) and use it with my 9700 pro, when i get it back.. im also thinking of buying a thermaltake xaser 3 case, as i had a xaser 2 case and i was impressed by its cooling and ease of putting it together. any further sugguestions? thanks for the help!
__________________
NF7-S Rev 2
XP1700 @ 2.45ghz (11.5x213fsb) @ 1.8vcore (bios setting)
Memory timings at cas 2 2-2-6 @ 2.7Vdimm (memory divider set to 3/3)
IBM Deskstar 80gig ata100 hard drive
Pioneer dvd-rom/dvd-rw
Xaser 2 case modded with 120mm side fan
Thermalright SLK-900U + 92mmm Tornado fan
Vantec 205SL Fan controller (controlling the 120mm fan and Tornado)
Enermax 460W PSU
Geforce 3 Ti 200 64mb
|