Pro/Forums - View Single Post

insomniac · 07-12-2001, 03:51 PM

RESULTS!!

After applying the pelt directly on a water block (which i was using for cooling my HD), then cooling the Hot side with a heatsink and fan, I was capable of getting the ambient water temp down about 16 degrees lower(93f instead of 109f). Not bad for a helpless cause, I think...My cpu temp stays at about 58c. Now I know thats high, but when you compare it to the previous temp which was no less than 60c and always around 70c, you do the math.

Any suggestions?

07-12-2001, 03:51 PM	#11
insomniac Cooling Neophyte Join Date: Jul 2001 Location: san fran Posts: 10	RESULTS!! After applying the pelt directly on a water block (which i was using for cooling my HD), then cooling the Hot side with a heatsink and fan, I was capable of getting the ambient water temp down about 16 degrees lower(93f instead of 109f). Not bad for a helpless cause, I think...My cpu temp stays at about 58c. Now I know thats high, but when you compare it to the previous temp which was no less than 60c and always around 70c, you do the math. Any suggestions?