[MichaelMuck]

Just hooked up a tt 252-p unit and have a few questions.

stats:

set chiller temp to 18c, room temp is 23c
running llww blk, 9700 pro blk,cs blk, 2400+ at 2315@1.85v

idle load
water 19.3c 19.7c
cpu 28c 32c
system 24c 25c
gpu 22c 24c

1. What's temp gradient? On mine its set at 60c, is this ok?

2. Should Idle and Load temps of the water be the same?

3. Since the unit has only a 50gph cent pump, is this hurting my cpu temps?

4. How far below room temp can I go before I get condensation on hose's and blocks inside the computer?

5. If the low gph is hurting my cpu temps, can I hook up another pump into the loop or do I have to remove the stock pump 1st?

thanks