Pro/Forums - View Single Post - For all you Electronic guru's out there, Temp Probe design

arcsylver · 08-23-2003, 11:32 AM

Well I am no expert in electronic design by any means but I do know a thing or three about building things from schematics etc.

What I need is a discussion on how to best design a calibrated tempeture probe and what you would need to get parts wise to do this.

Also in this might be a good idea to discuss the best way to get the most accurate calibration of the probe.

I have searched the forums but havent found any real good info on the design of a hand built model.

08-23-2003, 11:32 AM	#1
arcsylver Cooling Savant Join Date: Aug 2003 Location: State of insanity Posts: 101	For all you Electronic guru's out there, Temp Probe design Well I am no expert in electronic design by any means but I do know a thing or three about building things from schematics etc. What I need is a discussion on how to best design a calibrated tempeture probe and what you would need to get parts wise to do this. Also in this might be a good idea to discuss the best way to get the most accurate calibration of the probe. I have searched the forums but havent found any real good info on the design of a hand built model. __________________ Been Building these things since the IBM XT and I aint about to stop now!!! Prescott 2.8Ghz @ 3.08Ghz ECS 865PE-A Mobo Corsair 768 MB PC3200 DDR HP CD-Writer 9300 Maxtor 30 GB ATA Danger Den RBX 1957 Chevy Brass Radiator Danner Mag 7 Rackmounted Dual Blower w/Thermostat All this in a 4' Server cabinet