Pro/Forums - View Single Post - New WC rig in beginning stages...Wanting input

arcsylver · 08-27-2003, 08:36 PM

Well either way I stack the cabinets they are 26" deep by 24 " Wide so stability shouldn't be an issue.

That and it will be in the corner beside my desk when all the modding and installation is complete.

As for teh connections, I was hoping actually to find some shut off valves with a suitable diameter to not restrict flow too much for each branch off I do of the tubing runs at the back of the large cabinet.

I have a smaller version of what I am hoping to find with at least a 1/2" diameter inside the ball valve portion.

08-27-2003, 08:36 PM	#45
arcsylver Cooling Savant Join Date: Aug 2003 Location: State of insanity Posts: 101	Well either way I stack the cabinets they are 26" deep by 24 " Wide so stability shouldn't be an issue. That and it will be in the corner beside my desk when all the modding and installation is complete. As for teh connections, I was hoping actually to find some shut off valves with a suitable diameter to not restrict flow too much for each branch off I do of the tubing runs at the back of the large cabinet. I have a smaller version of what I am hoping to find with at least a 1/2" diameter inside the ball valve portion. __________________ Been Building these things since the IBM XT and I aint about to stop now!!! Prescott 2.8Ghz @ 3.08Ghz ECS 865PE-A Mobo Corsair 768 MB PC3200 DDR HP CD-Writer 9300 Maxtor 30 GB ATA Danger Den RBX 1957 Chevy Brass Radiator Danner Mag 7 Rackmounted Dual Blower w/Thermostat All this in a 4' Server cabinet