More questions:
Variable resistor(pot), and the voltage regulator. When more resistence is applied through the pot, does the regulator raise the output voltage? This is the only way I can see that adding another pot to set minimum voltage would work. Also to add the second pot, can i just solder some wires to the posts of the pot, and connect the second pot to that? That is what I was thinking.
Mains AC yields three wires: Power, neutral and earth. Is this right? The schematic shows two wires going into the transformer. One is labeled L (load? is this power?), and N (Neutral?), with a fuse between mains, and transformer on the N wire. Since I assume earth is unused, should I connect earth to the metal project case, that the transformer wil be in?
Thanks again guys.
BrianW
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).
Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.
Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
Last edited by BrianW; 08-30-2003 at 08:26 PM.
|