Quote:
|
Being air is lighter than water and air bubbles float to the top that would suggest the best place would be above all other parts in the system.
|
True enough, but a lot of cases won't have enough room for doing this, unless you want a lot of extra tubing in the loop.
What I did works really well - instead of a "T" Line, I used a "Y" on the return from the block to the pump inlet. So the left top of the Y goes to the block, and the bottom of the Y goes to the pump inlet. The top right of the Y goes to the "Y" line and feed. It bled the the whole loop in 2 hours or so. Works really well, and much more convienent than a T, at least in my rig.
Frob