[nikhsub1]

Originally posted by BrianW
Nik, you have this pump in a closed case. Have you noticed the case warming up at all from the pump? Does it vibrate any noise into the case?

Thanks again,

BrianW

I used to run it in a Lite-On FS-020 right next to the lower drive cage with NO direct air on it, it was fine. Now, My case has 13 fans... One of my heatercores is directly infront of the pump blowing air on it, stays MUCH cooler, I can actually hold it and not get burned. No vibration whatsoever, I took some mousepad material and cut it to the shape of the bottom bracket, then superglued it on the bottom so the pump sits on the neoprene. The pump is BOLTED to the bottom of the case, no noise at all.