OK I wired up the transformer, and got out the voltmeter. When i short the 12v and 0v I get 12vac, when i short the 12v and the 12v I get 24vac. So I imagine it could be used as a 12v or 24v transformer. I really want to try and hook the two 12v lines to my powersupply, and see if it works. But I should probably wait for confirmation.
EDIT: Impatience grows......I am the worst.
EDIT: Well I hooked up the power suplly to the two 12v outputs of the transformer. Power supply works, and the heatsink seems way overpowered... Another note: with this ps, 0 resistance is full speed, and 10k resistance is 3.3 volts. Do not see how I am going to get the minimum voltage now. Unless I find out what resistance that 7 volts is at, then get a pot that does not exceed that? Hmmn let me check that out....
BrianW
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).
Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.
Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
Last edited by BrianW; 09-05-2003 at 02:03 AM.
|