Pro/Forums - View Single Post - New WC rig in beginning stages...Wanting input

arcsylver · 09-08-2003, 12:44 PM

UPDATE:

Recieved the RAdiator today.

Needs a lot of TLC to get her to shine and be clean enought for a Watercooling rg but she is all mine now hehe.

I am going to have to take it somewhere or get myself a Propane torch to remove the mounting bracket fro it because it is a little too qide to fit the back of the server cabinet.

I am also going to have to take it to a radiator shop and have them remove the stock hose connectors and see about having smaller ones installed or perhaps just put copper plates over the holes tha I can later drill out carefully to solder 1" copper tubing connectors to.

Anyone have a goot website for hosting pics so I can take some pics of theis behemoth and give you all an Idea of the scope of this project?

09-08-2003, 12:44 PM	#50
arcsylver Cooling Savant Join Date: Aug 2003 Location: State of insanity Posts: 101	UPDATE: Recieved the RAdiator today. Needs a lot of TLC to get her to shine and be clean enought for a Watercooling rg but she is all mine now hehe. I am going to have to take it somewhere or get myself a Propane torch to remove the mounting bracket fro it because it is a little too qide to fit the back of the server cabinet. I am also going to have to take it to a radiator shop and have them remove the stock hose connectors and see about having smaller ones installed or perhaps just put copper plates over the holes tha I can later drill out carefully to solder 1" copper tubing connectors to. Anyone have a goot website for hosting pics so I can take some pics of theis behemoth and give you all an Idea of the scope of this project? __________________ Been Building these things since the IBM XT and I aint about to stop now!!! Prescott 2.8Ghz @ 3.08Ghz ECS 865PE-A Mobo Corsair 768 MB PC3200 DDR HP CD-Writer 9300 Maxtor 30 GB ATA Danger Den RBX 1957 Chevy Brass Radiator Danner Mag 7 Rackmounted Dual Blower w/Thermostat All this in a 4' Server cabinet