Pro/Forums - View Single Post

Zhentar · 09-11-2003, 01:27 PM

I'm going to assume this is the same 44-pin layout used for laptop hard drives. If so, then 40 of the pins match up perfectly, and of the remaining four, one is ground, and 2 are 5v, and one is unused. I'd go into more detail, but my attempt to solder such a connection was unsuccesful. CompUSA however actually had an adapter in stock for less than $10, so I'd check there.

09-11-2003, 01:27 PM	#2
Zhentar Cooling Savant Join Date: Apr 2003 Location: Madison, WI Posts: 225	I'm going to assume this is the same 44-pin layout used for laptop hard drives. If so, then 40 of the pins match up perfectly, and of the remaining four, one is ground, and 2 are 5v, and one is unused. I'd go into more detail, but my attempt to solder such a connection was unsuccesful. CompUSA however actually had an adapter in stock for less than $10, so I'd check there.