Pro/Forums - View Single Post

Arcturius · 12-06-2001, 11:53 AM

I'm not sure. I took the memory out, and it looked OK. I also tried moving it to different slots, and it still didn't work.
Also, the relative humidity last night was only 65%, which (according to the local news station) meant the dew point should have been at 28F, or -2.2C, which was several degrees below the temps I was seeing.
Lastly, after I warmed the memory up and put it back in, I didn't seem to have any problems running it for 1.5 hours after that, at 5C.
The only other thing I did differently is that I didn't push the VIO beyond 3.6V for any extended period of time. What confuses me is that I can run at room temperatures with VIO at 4.05V with no problems.

Maybe that was just a fluke?

12-06-2001, 11:53 AM	#4
Arcturius Cooling Savant Join Date: Aug 2001 Location: Chippewa Falls, Wisconsin Posts: 294	I'm not sure. I took the memory out, and it looked OK. I also tried moving it to different slots, and it still didn't work. Also, the relative humidity last night was only 65%, which (according to the local news station) meant the dew point should have been at 28F, or -2.2C, which was several degrees below the temps I was seeing. Lastly, after I warmed the memory up and put it back in, I didn't seem to have any problems running it for 1.5 hours after that, at 5C. The only other thing I did differently is that I didn't push the VIO beyond 3.6V for any extended period of time. What confuses me is that I can run at room temperatures with VIO at 4.05V with no problems. Maybe that was just a fluke? __________________ Everything aircooled (I honestly don't know why you guys let me stay a member...) Always folding: WXP Pro: KD7R + Palomino 1800+ W2K3: 4x P3 Xeon 500 512KB (4 clients) Linux boxes: none Had to put them to use doing real work.