I take it you mean Sydney, Australia?
Open the Yellow Pages and look under "Metal Merchants" or "Metal Suppliers"
None of the retail hardware stores will provide what you want.
Copper bar stock in Australia is typically sold using imperial dimensions. You want to ask for "C110 copper busbar stock"
The closest you'll get to 10mm is 3/8" (~9.5mm) in Australia, unless you pick up 1/2" thick stock and cut it down.
Bar stock of such thicknesses usually can be obtained in 1" wide, 2" wide formats, and you may even be able to pick it up in 3" and 4" wide strips.
They are typically sold in 8' long lengths. A single length will set you back a few hundred dollars depending on how thick it is. The metal merchant may be willing to cut off a shorter length for you.
|