Pro/Forums - View Single Post - Design verification... Need your help folks!

MMZ_TimeLord · 09-18-2003, 08:44 AM

trit187,

Yeah, I went through that ENTIRE thread and it was determined from the flow simulations that the square bottomed hole was indeed the best. It created the MOST turbulance.

Cathar,

Thanks for the reply. I'm just concerned that the effect won't be as pronounced as the flow through all of the jets combined is roughly 3 times that of the inlet tube. Will probably make for great flow but what will happen to my turbluance? Will it be more or less pronounced.

We may just have to see... :shrug:

09-18-2003, 08:44 AM	#4
MMZ_TimeLord Cooling Savant Join Date: Apr 2003 Location: San Mateo, CA, USA, Earth Posts: 433	trit187, Yeah, I went through that ENTIRE thread and it was determined from the flow simulations that the square bottomed hole was indeed the best. It created the MOST turbulance. Cathar, Thanks for the reply. I'm just concerned that the effect won't be as pronounced as the flow through all of the jets combined is roughly 3 times that of the inlet tube. Will probably make for great flow but what will happen to my turbluance? Will it be more or less pronounced. We may just have to see... :shrug: __________________ MMZ>TimeLord "Oooooooooh... that's gonna leave a mark!"