Pro/Forums - View Single Post

Kevin · 12-13-2001, 09:12 PM

You need to do a lot of things. First of all, you neeed to insulate the chilling blocks very well. Next, you need to MAXIMIZE H2O surface area. Try to slow the flow through the chiller blocks too. Like have dual blocks and have the water split into separate blocks and then get chilled seperately and then go back together. If you just run the water straight through, you'll get this.

12-13-2001, 09:12 PM	#2
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	You need to do a lot of things. First of all, you neeed to insulate the chilling blocks very well. Next, you need to MAXIMIZE H2O surface area. Try to slow the flow through the chiller blocks too. Like have dual blocks and have the water split into separate blocks and then get chilled seperately and then go back together. If you just run the water straight through, you'll get this. __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.