Pro/Forums - View Single Post

pHaestus · 10-05-2003, 08:59 PM

Ok guys I have my die simulator drilled and ready but need to insulate it still. I am thinking the tiles they use on furnaces may be the best bet for this. I also need to measure both current and voltage simultaneously while testing: Is a good DMM acceptable for this?

I killed a TBredB 1700+ that did 2400MHz last night trying to solder wires to it. The ground wire got somewhat out of position and when I forced the chip into the socket it exposed bare wire. Ground to CPU pins = not the best idea. I did dig up a 1200MHz Duron; gonna have to make do with that for now.

10-05-2003, 08:59 PM	#1
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	Cooler testing Ok guys I have my die simulator drilled and ready but need to insulate it still. I am thinking the tiles they use on furnaces may be the best bet for this. I also need to measure both current and voltage simultaneously while testing: Is a good DMM acceptable for this? I killed a TBredB 1700+ that did 2400MHz last night trying to solder wires to it. The ground wire got somewhat out of position and when I forced the chip into the socket it exposed bare wire. Ground to CPU pins = not the best idea. I did dig up a 1200MHz Duron; gonna have to make do with that for now.