Quote:
Originally posted by winewood
Those temps are very .. not good.
if your temps are good, but they gradually get worse.. then bad, it sounds like your water is getting hotter and hotter.
|
This what I've been getting and what I feared. Taking up Boli's suggestion, I turned the wick up on the Hardcano controller for my case fans - this seems to have done the trick!
My CPU temp seems stable at about 33C now under normal loads rising to no more than 36C
I ran 3DMark2003 Pro for the second time and lo and behold the CPU temp only reached a Max of 46.4C then dropped back - is this good?
I would welcome opinions on these temps
I woulod like to know how to increase the Radiator Fan (this is connected to the MB CPU Fan Connector) as with Q-Fan disabled the Fan speed is still only around 2500 rpm.
TAIA