Quote:
Originally posted by maxim
i believe that we will see OEM WC if the CPU's keep producing more and more heat. it is possible that a new technology could be used to make the CPU's cooler, but if it doesnt, then we'll have to resort to better cooling. what the WC kit for a regular user will be like is something like this:- closed loop
- all-in-one kit that includes WB, rad, fan, small but powerfull 12v pump (solid state maybe?)
- short hoses that are permanently attached and sealed with the rad and WB
- new case designs could be used to make installation of these kits easier
imagine having the standard case designed with a special window cut out on the side to mount a little radiator+fan in. the hoses that run just far enough to the WB with the right amount of slack, because all CPU's are in the same area in these cases. no need to refill or do any maintenance, except maybe blowing out some dust bunnies from the radiator. this can also be replaced with a system that uses an air filter that can be cleaned easier (think clothes dryer).
|
I think you are right – Most OEM wont aim for 5 degree’s above ambient. Instead they will aim for temps with in spec’s. How do I know this? I use to work for an international company that sells business machines. So the temp that OEM will aim for is about 135 F – so why not use air-cooling some may ask? Because the power (Wattage) being put out by the newer CPU will be higher where regular air cooling won’t cut it.