sbud,
It's good to know it's not just me. When I removed the WB the second time it was a little hard to remove (seemed to stick to the CPU) and possibly unseated the CPU. After this removal is when I'm getting the problem. I'm going to reseat the CPU and remount the block when I get home and post my results.
Thanks for the info!
Quote:
Originally posted by sbud
Um, I had the same problem with my WW and Abit IC7 Max3. With the micro nuts on, there was no way in hell the cpu was going to make contact with the block, just a quick side look will reveal that. I did not use the micro nuts at all and just screwed the rods from under the adapter plate up, they screw in pretty tight, and hasn't come lose on me yet, I have done alot of re-mounts too. The directions do say to use them, but IMO are not accurate, there are a couple of flaws with the given P4 adapter instruction sheet.
|