Quote:
Originally posted by Blackeagle
How's about this, "The Edge Block"
For the edges of the pins done with care to increase surface area of the pins edges.
Also liked the idea of having the central pin tapered to a point, with dimples around the pins.
Will be very interesting to see how much of a performance increase this will provide in a design that should still provide really high flow rates due to the lower number of pins. In the limited area just above the core this design should offer a large amount of surface area for heat removal.
While you may have posted the pump you intend for use in the 3 system folding set up I can't seem to find it. What pump will power your Tri-Folder Jaydee? Or will that choice wait for a final design of the CPU blocks?
|
I am planning on using a VIA 2600.
Max GPH = 740
Max head = 7ft
GPH at 4ft = 310
46watts per hour
I am also considering 2 VIA 1300's. If one fails there will still be one, but also double the chance of a failure....