Actually I have got no tubes at all, only the drill holes in the 2nd copper block. The distance between the holes and the cups is 2mm or less, as far as I can remember.
This is one difference to cathar's cascade, where the tubes end in the cups afaik.
my cups have got the same diameter as the holes (49! with 1.2mm diameter).
Well I'm going to test this stuff as soon as I have got the other komponents for my watercooling systems and the final blocks.
Maybe Somebody will test the blocks too.
__________________
P4 2,53 @ 3,02 | 1 GB Infineon DDR 333 | Chaintech Apogee 9ejl2 | Radeon 9500 Pro @ 370 / 330 46xx 3dmarks2k3
|