Pro/Forums - View Single Post

Player0 · 11-04-2003, 10:38 PM

At 2250mhz on an XP2400+ at 1.85v, HE120.3 radiator, Eheim 1060 pump, Im getting about 37c with the Cascade and 36c with the RBX.

Compared to the Maze4 which runs 39-40c, the AquaJoe at 41c, MCW5002 at 42c, SlitEdge at 42c, ThermoChill at 40c, and whatever else I tested.

On different flow settings and overclocks, the Cascade does a little better. The Cascade does a little better with restricted flow than the RBX, but Im using the #4 jet. Im sure I could adjust the RBX with the #2 jet, but it might reduce performance. The blocks are VERY similar though in performance. I beleive the Cascade is just slightly better performing though. I need to remount the block and run some more tests though, these RBX numbers are just prelim.

11-04-2003, 10:38 PM	#28
Player0 Cooling Neophyte Join Date: Nov 2003 Location: NY Posts: 45	At 2250mhz on an XP2400+ at 1.85v, HE120.3 radiator, Eheim 1060 pump, Im getting about 37c with the Cascade and 36c with the RBX. Compared to the Maze4 which runs 39-40c, the AquaJoe at 41c, MCW5002 at 42c, SlitEdge at 42c, ThermoChill at 40c, and whatever else I tested. On different flow settings and overclocks, the Cascade does a little better. The Cascade does a little better with restricted flow than the RBX, but Im using the #4 jet. Im sure I could adjust the RBX with the #2 jet, but it might reduce performance. The blocks are VERY similar though in performance. I beleive the Cascade is just slightly better performing though. I need to remount the block and run some more tests though, these RBX numbers are just prelim.