--------------------------------------------------------------------------------
At 2250mhz on an XP2400+ at 1.85v, HE120.3 radiator, Eheim 1060 pump, Im getting about 37c with the Cascade and 36c with the RBX. Compared to the Maze4 which runs 39-40c, the AquaJoe at 41c, MCW5002 at 42c, SlitEdge at 42c, ThermoChill at 40c, and whatever else I tested.
--------------------------------------------------------------------------------
This speaks for itself. Yes I have already dismissed his review for the reason above. He sounds like an unorganized fool. Why should I NOT dismiss it?
I dont know whats wrong with the Maze4 numbers. Its right on par with what other people seem to get for the block. The MCW5002 numbers are a bit higher cause of the mounting. I dont know why the SlitEdge was high, I expected it to do better. But they are all within 1c of each other, where most of the blocks end up except for the RBX and Cascade. I had the Maze4 mounted 3 different times during testing. The numbers were consistant there.
These are only some of the numbers. I tested each block at default speeds, and overclocked to 2250. And I tested each speed with full flow, and restricted flow (thanks to a gas ball-valve) which simulates (albeit roughly) a constricted system or a smaller pump. The Maze4 numbers are much more average than your seeing here with just my small sampling of results.
Im not purposely being ambigious, Im just not done confirming results. I just wanted to show some prelims on the RBX because I really like the block.
|