Pro/Forums - View Single Post

Gooserider · 11-09-2003, 09:25 PM

I discussed a theoretical possibility
here that seems like one way to address the consistent mounting pressure question. It still leaves the TIM goop application issue open, but I don't have any ideas on that other than possibly a specified drill of cleaning each surface a particular way, then applying a pre-measured amount of goop in a specified manner. (This might not be the 'optimal' method, but I see repeatability as more critical)

Gooserider

11-09-2003, 09:25 PM	#2
Gooserider Cooling Savant Join Date: Jun 2003 Location: North Billerica, MA, USA Posts: 451	I discussed a theoretical possibility here that seems like one way to address the consistent mounting pressure question. It still leaves the TIM goop application issue open, but I don't have any ideas on that other than possibly a specified drill of cleaning each surface a particular way, then applying a pre-measured amount of goop in a specified manner. (This might not be the 'optimal' method, but I see repeatability as more critical) Gooserider __________________ Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c