Quote:
Quoted by pHeastus
Another option would be to get a 172W pelt instead of the 226; the 172s are rated up to 24V. The Meanwell can be adjusted +/- 10% so 21.6V minimum.
|
Sorry to but in on this one.. but I just able to read this thread. The 24v meanwells that have the +V adjustment go down to 18V on the dot. That would place the 24V pelts working off it able to adjust right in their most efficient range. A 172W should be plenty to cool anything currently out there processor wise. I have yet to see any data proving otherwise.