My old setup got an update. See
This link for my old rig I got a P4 2.0a from a friend for free so I purchased an Asus P4P800-Deluxe, 512mb PC3500 and an Allied 400W PSU (don't buy fans are loud). I then purchased a p4 White Water from Dtek. THIS THING ROCKS!! I can't believe the temps I'm getting. I've got a DD5 sensor mounted to the side of the heat spreader and I'm assuming the Asus board reports the internal temp from the CPU rather than from a probe. Is this correct? I didn't see a thermal sensor in the cpu socket. Below is run down of the setup and temps. I haven't had much time to test after setting up so I haven't pushed the cpu as high as it can go.
BLX w/ Sunon 120mm 86cfm.
Spir@l
Danner 5
1/2 ID tygon
4x 80mm Vantec stealth fans @ 21cfm
1x 120mm Adda 75cfm
6x6x4” under ground electrical junction box and ¾” pvc.
WW with ALU top 1/2" barb.
Idle 23 Load 27
See pics below.