Quote:
Originally posted by bigben2k
You're going about it the wrong way.
You don't need to be concerned with the height, unless you plan to run an open loop. The head you need to lift the water up, is negated by the water going down, so all you really have to worry about, is the flow restriction of the tubing run.
Otherwise, make sure you clamp those rad connections tight, because you will have the total head of pressure on it.
|
technically, correct (does need to be completely filled from the top bleeding all air before starting)
however, no engineer wanting to keep his degree/job would EVER do/spec such a thing.
not the place to go ghetto.... get a real pump!