Quote:
Originally posted by Pears0
Thax for the links/ideas. The King pin would b near perfect fro me if the results are doing pretty well, as i am an AMD fan, and will always use AMD. Specially as there could b a chance that intel might have to give up the ghost on theperformance market. Better than or close to rotor style blocks? but i would prefet to design a block i could make with limited tool, ie drill/dremel cos i am not entierly sure i know of any 1 who could machine it forme, or has a mill i could use when i wanted to. Do you have any ideas for makin the king pin with the drill dremel method at all after having the experiance of acctually makin it.
|
I desingedthe King Pin for Barton AMD CPU's. If you want to use the block for Athlon FX/Opterons then you will want to make some modifications. Non of which is hard to do. Just some extra work as it needs to be a little bigger to compensate for the IHS on the Opterons. Yes it can be done on a drill press like the block I linked above from overclockers. That is pretty much the same thing just a little bigger. I am already working on a drawing for this and will post a example tonight when I get home. I am going to use this type of block for my TEC/Pelt block design.