Well after a little ISP Weld On #4 it seems to be ok. Been running full speed for a couple hours now.
Took my TC out from under the CPU and took my indoor/outdoor probe and unslodered the thermistor from inside the housing and attached a set of wires to it and soldered the thermistor to those wires so now both the probes are able to be calibrated. So now I am calibrating them and as I suspected they arte all messed up. So I am going to try the joy stick mod. I should have enough thermisters laying around and plenty of old busted joysticks.
http://www.benchtest.com/gp_Temp.html