Pro/Forums - View Single Post

Tempus · 12-01-2003, 06:41 PM

I'm not talking about using the blocks as an evaporator in the refridgeration cycle. I'd use a plate and frame system to create cold water and pump that water through the water blocks.

But it would be a very cold water. Cold enough I don't want to use water as the liquid medium. So I was thinking of using a liquid like R12/502/232/132 etc since they tend to have a lower freezing point.

I just want to make sure that the pieces won't go ugly.

the pressure will be no higher than a normal watercooled system.

12-01-2003, 06:41 PM	#4
Tempus Cooling Savant Join Date: Jul 2003 Location: Michigan, USA Posts: 456	I'm not talking about using the blocks as an evaporator in the refridgeration cycle. I'd use a plate and frame system to create cold water and pump that water through the water blocks. But it would be a very cold water. Cold enough I don't want to use water as the liquid medium. So I was thinking of using a liquid like R12/502/232/132 etc since they tend to have a lower freezing point. I just want to make sure that the pieces won't go ugly. the pressure will be no higher than a normal watercooled system. __________________ Thou art God.