Pro/Forums - View Single Post

fhorst · 12-03-2003, 04:57 PM

OK, thanks for the input!

I had some bike chain grease laying arround, it's a spray with HPL PTEE that can be used for "all" that needs grease and has a temp range from -50 to 250 degrees It thin, but vaporises quickly and then leaves a film of grease.

For now it's working, so I let my blower run for 2 days, see if the problem is solved.

There is now also grease inside the copper windings of teh motor, and on the magnet..... I hope that does not matter....

12-03-2003, 04:57 PM	#9
fhorst Cooling Savant Join Date: Oct 2003 Location: Almere, The Netherlands (Europe) Posts: 262	OK, thanks for the input! I had some bike chain grease laying arround, it's a spray with HPL PTEE that can be used for "all" that needs grease and has a temp range from -50 to 250 degrees It thin, but vaporises quickly and then leaves a film of grease. For now it's working, so I let my blower run for 2 days, see if the problem is solved. There is now also grease inside the copper windings of teh motor, and on the magnet..... I hope that does not matter.... __________________ If it get's hot, it needs to be watercooled!