Pro/Forums - View Single Post

nexxo · 12-08-2003, 01:42 PM

If you mean the clamps, they were bought at a marine supply store. They are marine-grade stainless steel (no corrosion there!).

If you mean the hose seperator, they come from Billet Specialties :here:. They are polished aluminium, and are made for car customising purposes. The ones I used are 0.625 " x 0.625" size, suitable for thick-walled 3/8" ID Tygon, but they come in a range of sizes.

As for the block, yup: I had it sandblasted, and then I hand-polished it to a shine.

Thanks for the idea, Coolermeister!

12-08-2003, 01:42 PM	#6
nexxo Cooling Savant Join Date: Jul 2002 Location: Brimingham, UK Posts: 385	If you mean the clamps, they were bought at a marine supply store. They are marine-grade stainless steel (no corrosion there!). If you mean the hose seperator, they come from Billet Specialties :here:. They are polished aluminium, and are made for car customising purposes. The ones I used are 0.625 " x 0.625" size, suitable for thick-walled 3/8" ID Tygon, but they come in a range of sizes. As for the block, yup: I had it sandblasted, and then I hand-polished it to a shine. Thanks for the idea, Coolermeister! __________________ "There is a thin line between magic and madness" Last edited by nexxo; 12-08-2003 at 01:50 PM.