Quote:
Originally posted by Aardil
My concerns on the intake side of pump are based on the fact that the Enhiem 1250 has a 5/8 inlet and a 1/2 outlet.
I wouldnt want to reduce the intake down to 1/2. Enhiem made it with a 5/8 for a reason.
Using a true Reservior would work but it will take up more room and you would still need the 5/8 hose to connect Res to pump. Also from what I see you were/ are using a fill "T".
I would check around ( mcMasters) for a couple feet of 5/8 or 3/4 hose. Also check your local auto parts stores for a reducer, Goodyear makes a plastic reducer from 3/4 to 5/8 and I am pretty sure Clear flex can stretch over a 5/8 fitting, If not I know Tygon can.
I really think you would be better off with the larger hose over a true Res, In your particular set up.
|
True dat. My mag 3 has *real* 1/2" threads on both the intake and outlet. The outlet is a male connector, so it is already scaled down to about 1/2" ID tubing size, so restricting that is not a problem. My intake, however, is directly connected to the resevior with a dual threaded 1/2" pipe fitting, so it is like having a much larger intake diameter than outlet diameter. Can we say no restriction
