Pro/Forums - View Single Post

killernoodle · 12-21-2003, 11:20 PM

If they the 1/2" Dtek GPU and NB blocks, this would work very well because they are essentially the same block and therefore would cause almost equal restriction. Water would be split fairly evenly between the two. It would be even better if you could keep their lines seperate until you got to a resevior or something, but it doesnt look like you have one in your system. Having them inline will create more restriction than keeping them seperate after the whitewater, thereby improving temps for the CPU. Also, the NB and GPU dont produce nearly as much heat as the CPU, so you should be alright in that category. I'd say go for it.

12-21-2003, 11:20 PM	#2
killernoodle Thermophile Join Date: Sep 2002 Location: Charlotte, NC Posts: 1,014	If they the 1/2" Dtek GPU and NB blocks, this would work very well because they are essentially the same block and therefore would cause almost equal restriction. Water would be split fairly evenly between the two. It would be even better if you could keep their lines seperate until you got to a resevior or something, but it doesnt look like you have one in your system. Having them inline will create more restriction than keeping them seperate after the whitewater, thereby improving temps for the CPU. Also, the NB and GPU dont produce nearly as much heat as the CPU, so you should be alright in that category. I'd say go for it. __________________ I have a nice computer.