Pro/Forums - View Single Post

Blackeagle · 12-26-2003, 03:25 PM

The temps I posted were based on info posted by Cathar. He had 2c better with his MD30rlzt Iwaki pump. That is a really xtremly high pressure pump.

If you have one of Cathar's original WW blocks then I think you'll only see about 2c. But if you have the D-tek WW you may well do better, as from many things I've read, it doesn't sound like D-Tek is doing as good a job of finishing the base as Cathar did.

And that differance in quality of the base finish could mean quite a bit in temp improvements.

12-26-2003, 03:25 PM	#8
Blackeagle Thermophile Join Date: Oct 2002 Location: U.S.A = Michigan Posts: 1,243	The temps I posted were based on info posted by Cathar. He had 2c better with his MD30rlzt Iwaki pump. That is a really xtremly high pressure pump. If you have one of Cathar's original WW blocks then I think you'll only see about 2c. But if you have the D-tek WW you may well do better, as from many things I've read, it doesn't sound like D-Tek is doing as good a job of finishing the base as Cathar did. And that differance in quality of the base finish could mean quite a bit in temp improvements.