Pro/Forums - View Single Post

spawningvat · 01-07-2004, 10:40 AM

I ran 2 weak mixtures of simple green and water thru the system, which turned to a chocolate milk consistency. Then flushed it out with constant tap water for a few minutes, refilled with new generic blue windshield washer fluid, and now i'm kicking it at 32*c idle, about 36*c under load according to mbm from the onboard temp probe. ambient is 30*c. not bad for the cheapest relatively good system i could through together.

My friend just spent $90 on a dtek whitewater and a 120 fan, i spent only alittle more on my whole system. Scratch and dent d-tek blocks are excellent, especially after lapping to 1000grit.

thank you groth and boli

later

01-07-2004, 10:40 AM	#4
spawningvat Cooling Neophyte Join Date: May 2003 Location: reading Posts: 7	cleaned I ran 2 weak mixtures of simple green and water thru the system, which turned to a chocolate milk consistency. Then flushed it out with constant tap water for a few minutes, refilled with new generic blue windshield washer fluid, and now i'm kicking it at 32c idle, about 36c under load according to mbm from the onboard temp probe. ambient is 30*c. not bad for the cheapest relatively good system i could through together. My friend just spent $90 on a dtek whitewater and a 120 fan, i spent only alittle more on my whole system. Scratch and dent d-tek blocks are excellent, especially after lapping to 1000grit. thank you groth and boli later