Quote:
|
o and im using the new prescott core for the P4 when it comes out, so the fins in my plan are in contact with the core i believe, the center is a circle and its radius is 56mm so if i can find out the dimentions of a P4s core, which is not actually the core but a protective metal that lies on top of the core.
|
You will find the dimensions for all CPU's from the technical sheets on the manufacturers website.
By the circle do you mean the blue elipse in your drawing? If so a 56mm radius is going to be huge.
Quote:
|
well i would put my design that is detailed up but im afraid that someone will take it , its really detailed and to scale thats y i put up one that isnt to scale or detailed.
|
I would only worry if your planning to take it into production
Quote:
|
so could someone get me the WW blueprints,
|
I asked something similar to this last October about a few blocks (to no avail) because I wanted to create CAD models of existing blocks to compare with my design in CFD but I quickly realised I didn't have time to teach myself how to use the software. You can get a really good idea of the dimensions from photos though just print them out to scale and measure them