Thoughts on adding tec cooling to a WC loop
Thoughts on the idea of adding a weak tec pelt into a WC loop to help bring down the temps by a few more degrees? This is a schematic I came up with after some discussion with ben333. Right now, I'm debating between directly tec chilling the cpu/gpu or doing this. The benefit of this is that it would just cool the water a little and hopefully I won't have to worry about condensation etc. While if I go the direct cooling way, I'd have to get very powerful pelts (200w for the cpu and 300w for the gpu) and would then have to start worrying about things like condensation?
ps- there is an error in the pic ... the water should be going from the cpu -> gpu -> 120.2 radiator not to the rad before the gpu
|