Quote:
Originally posted by bowman1964
|PuNiSh3R| take a look.
well first day of testing .so i thought what the hell get out the big peltier. 156watts at 13.8 volts.full loaded my block .didnt do bad at all.i had to adjust the freon some.caused my no load temps to go from -53.5 down to -45. but at least is keeping the block cold.i have 3 probes.one one the cold plate reading-43.3 one on the hot side of the peltier reading -7.5 on one on the block reading -27.7.not too bad so far.
|
Nice work!
That's what I'd like to get into, but I don't have enough info to build my own assembly from scratch. Your website has some info, but did you ever write up an article about it?
Punisher: the temps that you reach depend on the refrigerant that you use: R-22 (dehumidifier) will reach a lower temp than R-134A(fridge).