Motherboard Manufacturer feedback / poll

ben333 · 01-22-2008, 07:22 PM

Because of the ' What happened to Asus?? ' thread I thought it would be neat to see who people think is the best and who is the worst. Please vote and post some feedback. BTW: any other moderators feel free to move this is I put it in the wrong spot. If I missed the company you wanted to vote for, please let me know before you vote so I can add it in. Please only select the one(s) that you have had the best experience with.
I voted Asus and A Open because I have honestly not had problems with them and have own a few A Open boards and several Asus boards.

jaydee · 01-22-2008, 07:51 PM

I had to go with Abit mostly because I never had a bad one and they were one of the first with 3 phase power. Had several over the years and they all still work.

I have owned at least one of the following and multiples of some of them:
Abit
Asus
ECS
PCChips
MSI
ASRock
A-Open
Shuttle
Bio Star
Epox
Gigabyte

The only one that I remember ran poorly in stock form was the Asus A8V.

ben333 · 01-22-2008, 08:11 PM

Ah I also will list mine:
Abit: one that I can remember (the one I currently use)
Asus: 5 or more I think
VIA: One or more
MSI: One or more
Intel: Probably 5 or more range
A-Open: Several ... 5 or more ish I think
Boards in compaq computers: 6 or more
Boards in packard bell systems: 3 or more
Boards is HP comps: 3 or more
Boards in IBM rigs: two or more
Boards in gateway comps: 5 - 10 or more
Unknown boards (just don't remember) 10 - 30
And a lot of this stuff I got used (90% lol) and most was before I ever went to online forums so its kind of how I thought myself to use the computer was by grabbing every free system I could and experimenting. Paid off I guess lol

cabose1227 · 02-05-2008, 09:17 PM

abit ip35-e!!!!!!!

Spaceraver · 02-05-2008, 11:12 PM

Gigabyte P35 boards are rock solid, I used to be an ASUS man but recently specc'ed a new machine for a family member. I havent been let down by that Gigabyte board yet. Add to that fact that I currently run a Asus p4p800 SE mobo myself, and found that quite unstable.

ben333 · 02-06-2008, 11:21 AM

Yea I hear ya on the gigabytes. I'm looking into a DS3-L ( I think ) hehe... but my aw9dmax just isn't quad friendly

View Poll Results: What company do you feel currently makes the best motherboards?
Asus	4	36.36%
Abit	4	36.36%
ASRock	0	0%
Gigabyte	5	45.45%
Intel	1	9.09%
ECS	0	0%
MSI	1	9.09%
XFX	1	9.09%
A Open	1	9.09%
Foxconn	0	0%
DFI	1	9.09%
EVGA	2	18.18%
Biostar	0	0%
Mach Speed	0	0%
Multiple Choice Poll. Voters: 11. You may not vote on this poll

01-22-2008, 07:22 PM	#1
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Motherboard Manufacturer feedback / poll Because of the ' What happened to Asus?? ' thread I thought it would be neat to see who people think is the best and who is the worst. Please vote and post some feedback. BTW: any other moderators feel free to move this is I put it in the wrong spot. If I missed the company you wanted to vote for, please let me know before you vote so I can add it in. Please only select the one(s) that you have had the best experience with. I voted Asus and A Open because I have honestly not had problems with them and have own a few A Open boards and several Asus boards. __________________ Pro Slacker Last edited by ben333; 01-22-2008 at 07:30 PM.

01-22-2008, 07:51 PM	#2
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Re: Motherboard Manufacturer feedback / poll I had to go with Abit mostly because I never had a bad one and they were one of the first with 3 phase power. Had several over the years and they all still work. I have owned at least one of the following and multiples of some of them: Abit Asus ECS PCChips MSI ASRock A-Open Shuttle Bio Star Epox Gigabyte The only one that I remember ran poorly in stock form was the Asus A8V.

01-22-2008, 08:11 PM	#3
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Motherboard Manufacturer feedback / poll Ah I also will list mine: Abit: one that I can remember (the one I currently use) Asus: 5 or more I think VIA: One or more MSI: One or more Intel: Probably 5 or more range A-Open: Several ... 5 or more ish I think Boards in compaq computers: 6 or more Boards in packard bell systems: 3 or more Boards is HP comps: 3 or more Boards in IBM rigs: two or more Boards in gateway comps: 5 - 10 or more Unknown boards (just don't remember) 10 - 30 And a lot of this stuff I got used (90% lol) and most was before I ever went to online forums so its kind of how I thought myself to use the computer was by grabbing every free system I could and experimenting. Paid off I guess lol __________________ Pro Slacker

02-05-2008, 09:17 PM	#4
cabose1227 Cooling Neophyte Join Date: Feb 2008 Location: lompoc Posts: 1	Re: Motherboard Manufacturer feedback / poll abit ip35-e!!!!!!!

02-05-2008, 11:12 PM	#5
Spaceraver Cooling Neophyte Join Date: Feb 2006 Location: Denmark Posts: 18	Re: Motherboard Manufacturer feedback / poll Gigabyte P35 boards are rock solid, I used to be an ASUS man but recently specc'ed a new machine for a family member. I havent been let down by that Gigabyte board yet. Add to that fact that I currently run a Asus p4p800 SE mobo myself, and found that quite unstable.

02-06-2008, 11:21 AM	#6
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Motherboard Manufacturer feedback / poll Yea I hear ya on the gigabytes. I'm looking into a DS3-L ( I think ) hehe... but my aw9dmax just isn't quad friendly __________________ Pro Slacker

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)