|
|
Hardware and Case Mod's You Paint it, Cut it, Solder it, bend it, light it up, make it glow or anything like that, here is your forum. |
Thread Tools |
07-13-2002, 11:30 PM | #1 |
Cooling Neophyte
Join Date: Sep 2001
Location: Miami, FL
Posts: 67
|
No voltage
Well I wired 3 psu together (so only need one plug) and everything was working great...now one of the psu has 0 volt output, fan still runs, and there was no burnt smell....any ideas?
|
07-15-2002, 02:15 AM | #2 |
Thermophile
Join Date: Oct 2001
Location: Nuu Zeeelin
Posts: 3,175
|
disconnect that one and see if it still works. if it does then it most likely will be that it is producing a slowly lower voltage than the other two power supplies, so the current is leaking back to the third power supply, so the third simply turns off.
are all 3 power supplies identical?
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|