New Case for me to mod

OcPunK · 02-05-2002, 05:46 AM

http://www.1337info.com/images/ocp/new%20case/

(I'm duh and had the cam at 640x480 and was too lazy to re take the pics)

Gonna be for my main PC specs:
Athlon Tbird 1.33Ghz AYHJA "9" @1.61Ghz 2.3Vcore
Shuttle AK31a KT266A motherboard
512MB PC2100 Crucial DDR
Radeon 8500LE 64MB voltage modded running 290/300 gonna add some more cooling to it and bump the voltage up a bit more for 320/320.
Linksys PCI 100/10MB Nic
Promise Ultra100 IDE controller
2x 13.6GB 7,200RPM Maxtor IDE drives in RAID0 using the above controller in software RAID0
3.2GB IDE drive for winXP only
24x CDROM
400Watt Antec PSU with tweaked Pots

CPU is cooled by a 3/8" MAZE2 rio600 Pump and a 88' Ford Escort Heatercore. I want to upgrade the cooling to a Maze1c and a ehiem pump and run all 1/2" tubing.

Anyway give me some ideas for the case.
Thanks

Brad · 02-08-2002, 06:45 AM

nice looking case, but why go from a maze2 to a maze1c? even if it is from 3/8" to 1/2", it might be easier to modify the maze2

OcPunK · 02-08-2002, 01:50 PM

the Maze2 is a bitch to install and take off

02-05-2002, 05:46 AM	#1
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	New Case for me to mod http://www.1337info.com/images/ocp/new%20case/ (I'm duh and had the cam at 640x480 and was too lazy to re take the pics) Gonna be for my main PC specs: Athlon Tbird 1.33Ghz AYHJA "9" @1.61Ghz 2.3Vcore Shuttle AK31a KT266A motherboard 512MB PC2100 Crucial DDR Radeon 8500LE 64MB voltage modded running 290/300 gonna add some more cooling to it and bump the voltage up a bit more for 320/320. Linksys PCI 100/10MB Nic Promise Ultra100 IDE controller 2x 13.6GB 7,200RPM Maxtor IDE drives in RAID0 using the above controller in software RAID0 3.2GB IDE drive for winXP only 24x CDROM 400Watt Antec PSU with tweaked Pots CPU is cooled by a 3/8" MAZE2 rio600 Pump and a 88' Ford Escort Heatercore. I want to upgrade the cooling to a Maze1c and a ehiem pump and run all 1/2" tubing. Anyway give me some ideas for the case. Thanks __________________ www.1337info.com

02-08-2002, 06:45 AM	#2
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	nice looking case, but why go from a maze2 to a maze1c? even if it is from 3/8" to 1/2", it might be easier to modify the maze2 __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-08-2002, 01:50 PM	#3
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	the Maze2 is a bitch to install and take off __________________ www.1337info.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)