|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
Thread Tools |
04-30-2001, 05:26 PM | #1 |
Cooling Savant
Join Date: Nov 2000
Posts: 130
|
lookin for Radiator with 1/2" or bigger inlets
Anyone know of any? I would like to play around a little with flow rate, temperatures, and hose size a little. So if you know of one, drop me a line.
__________________
ondaedg@procooling.com |
04-30-2001, 07:51 PM | #2 |
Cooling Savant
Join Date: Apr 2000
Location: Bremerton, WA
Posts: 514
|
Heater cores come with fittings around that size.
__________________
The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM! |
05-01-2001, 08:45 AM | #3 |
Cooling Savant
Join Date: Dec 2000
Location: Atlanta
Posts: 154
|
Not sure about others, but I do know that OCWC sells BigMama with 1/2" by request.
Not sure if you're looking for something cheaper to play around with tho. |
05-11-2001, 03:07 PM | #4 |
Cooling Neophyte
Join Date: Apr 2001
Posts: 5
|
use an oil cooler from a small car or motorbike, they are easily adapted (once cleaned) and have approx 1/2" bore.
__________________
goat |
05-11-2001, 08:14 PM | #5 |
Cooling Neophyte
Join Date: May 2001
Posts: 3
|
Lots of pics and stuff here:
http://www.heatercore4u.com/ |
05-12-2001, 03:42 AM | #6 |
Cooling Savant
Join Date: Nov 2000
Posts: 130
|
thanks for the info guys. Bill, I was lookin at that site last nite. There has to be other heatercore sites online. The better the selection, the better for us.
__________________
ondaedg@procooling.com |
05-13-2001, 07:29 AM | #7 |
Cooling Neophyte
Join Date: Apr 2001
Posts: 5
|
just go to a scrap yard ( i believe they are called "junk yards" in the US ! )
you will find oil cooler on a motorbike or small car ( got mine from a mini !!) good luck
__________________
goat |
05-27-2001, 04:53 AM | #8 |
Cooling Neophyte
Join Date: May 2001
Location: las vegas
Posts: 3
|
Get a hayden 1401 and cut off the ends. They flare down to a 3/8 hose size but the tube is damn close to 1/2". If you cut it right, you'll have plenty of room for the hose clamps. Good luck with your w/c setup.
FrakinCold WWW.FreakinCold.com |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|