Liquid Cooling? People still do that?

jaydee · 03-22-2008, 11:46 AM

I had a Chevette heater core with shroud collecting dust and a Aquaxtreme 50Z pump. I got several Aquaxtreme/Cooltechnica blocks. I went with the MP-05 SP. Note this is NOT the newest version as the pin count is less. However the performance is still very good.

I decided to put the rad on top of my case in the back. I never liked the rad inside the case. I like the idea of outside non restricted air flow. Also in this configuration I can use the radiator as the rez/air bleed. All I had to do was drill a hole and solder on a barb pointing up and clamp on some tubing. This worked as good as I thought it would.. Took a couple hours to bleed but after that no more bubbles in the lines. I put a Panaflo 75 CFM fan on the shroud and lowed the voltage to around 6V to shut it up. With the fan at full speed the temps seem not to budge to much.

System Specs.

AMD 64 3000+ Stock speed 2ghz currently running 2,660mhz at 266fsb. Stock voltage.
2gig cheap DDR400 not overclocked.
200gig IDE ATA133 7200 8meg cache Maxtor. Failthful for a few years now.
Radeon X1950Pro 256bit 256meg GDDR3 Stock. Not much of an overclocker.
ASRock K8NF6G-VSTA mother board. Has been rock solid.

AquaXtreme 50Z 12V pump

AquaXtreme MP-05 SP

Temps are excellent. However the 50Z pump is LOUD as hell. I hear they take a while to break in and quiet down but if it doesn't quite down back to air and the XP90.

jaydee · 03-23-2008, 09:07 AM

Well the 50Z pump must be defective. It is extremely loud and vibrating. My keyboard is vibrating as I type this.... I got a gen-X 1200GPH pump that is quieter than this little thing. I am going to pull it out and stick the XP-90 air cooler pack in for now and tear the pump apart and see if anything is a miss.

ben333 · 03-23-2008, 09:13 AM

Well thats jaydee and pH back on water!

Now we need more! Joe?

jaydee · 03-23-2008, 02:11 PM

Quote:

Originally Posted by ben333

Well thats jaydee and pH back on water!

Now we need more! Joe?

Well it was short lived but plan on getting the loop back up with a quiet pump.

Puzzdre · 03-25-2008, 06:51 AM

LOLLL, cheers

, good to see some of the "old" guys still run on water (even occasionally)

Just droppin a line to say hello

SiGfever · 04-06-2008, 03:08 PM

Once you get "Wet", it's tough to go back.

mwolfman · 06-29-2008, 04:08 PM

Quote:

Originally Posted by SiGfever

Once you get "Wet", it's tough to go back.

Yeap, heatpipes has come a long way since I started but I hit the barrier yesterday evening (with the best cooler on the market) (Edit: And darn that system is laud!), so my own new rig will be water (modify my present system). My concurrent H2O-system gives 3dB @ 50cm away.

Probably the GPU has to be air-cooled (the price for the cooler is almost same as for the G-card)

DX2 · 07-21-2008, 12:49 AM

considering the blistering 140W of heat the AMD/ATI 48070 X2will put out, and what 12core beats in 2010... i think water may find a relevance yet.

thing is heat pipes are just that... mini water coolign systems, a rad, a vapour/liquid filled pipe and a contact surface to the cpu.

i still plan on going WCed on my main gaming/performance rig. its just so much more 1337 ^_^

03-23-2008, 09:07 AM	#2
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Re: Liquid Cooling? People still do that? Well the 50Z pump must be defective. It is extremely loud and vibrating. My keyboard is vibrating as I type this.... I got a gen-X 1200GPH pump that is quieter than this little thing. I am going to pull it out and stick the XP-90 air cooler pack in for now and tear the pump apart and see if anything is a miss.

03-23-2008, 09:13 AM	#3
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Liquid Cooling? People still do that? Well thats jaydee and pH back on water! Now we need more! Joe? __________________ Pro Slacker

03-25-2008, 06:51 AM	#5
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	Re: Liquid Cooling? People still do that? LOLLL, cheers , good to see some of the "old" guys still run on water (even occasionally) Just droppin a line to say hello __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

04-06-2008, 03:08 PM	#6
SiGfever Cooling Neophyte Join Date: May 2006 Location: Virginia, USA Posts: 53	Re: Liquid Cooling? People still do that? Once you get "Wet", it's tough to go back. __________________ U2-UFO; Corsair HX620W; Q6600 "GO" (L723A) vid=1.2125v @3.61Ghz 1.32v; P5K Premium; Ballistix 6400c4 4x1Gb; eVga eGeforce 7600GT KO 256mb; Samsung 245BW; Klipsch Promedia 2.1; FuZion; DDC-2 w/ AlphaCool top; PA120.3 rad_push/pull; 7/16" Tubing. (In progress) MCW30; EK Asus3a Acetal Mosfet; MCX159-CU; MCR220; 3/8" tubing. Sigmund Freud said..."Failure to CRUNCH is a sign of Sexual Inadequacies".

07-21-2008, 12:49 AM	#8
DX2 Cooling Neophyte Join Date: Oct 2005 Location: Würzburg, Germany Posts: 18	Re: Liquid Cooling? People still do that? considering the blistering 140W of heat the AMD/ATI 48070 X2will put out, and what 12core beats in 2010... i think water may find a relevance yet. thing is heat pipes are just that... mini water coolign systems, a rad, a vapour/liquid filled pipe and a contact surface to the cpu. i still plan on going WCed on my main gaming/performance rig. its just so much more 1337 ^_^

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)