Something to do with all those left over parts!

Titan151 · 06-23-2004, 12:59 PM

Hmmmm,

So I am running low on projects to work on. I have a bunch of left over components that I wan't to mess with. I gots me this 175 watt TEC that I was thinking of putting between two of those cheap Koolance hard drive coolers. I have some copper that I could use for the cold plate and a PSU supply for testing purposes. I am thinking of buying two Hard drive coolers from ebay, and building me a tec, coldplate, Koolance sandwich. Then I can put 100 + pounds of wait on top. Top it off with a heaping helping of thermal paste

for flavor). Then using my old via aqua hooked to the hot side and my rad which I don't use (I have a chiller). Then cycle the cool side through my maze 4 with the swifty pump. They sell those things on the ebay for 14 bucks. Not sure how good the flow pattern is on the inside. I imagine since it is Koolance they may not be anything more then a metal box with two outlets. So if I drop 30 bucks plus a bit on shipping I have a new project! Any input on this.

kronchev · 06-23-2004, 01:55 PM

im really confused on everything on that post. can you make a diagram?

Titan151 · 06-23-2004, 02:25 PM

Heh, of course I love diagrams

!

kronchev · 06-23-2004, 02:26 PM

ohhh so its a waterchiller

go for it, should be cool

Titan151 · 06-23-2004, 02:45 PM

well yes, but will it work. I will have to find out.. I am off to the great EBAY! I think just to see for testing purposes I will put a fan based hard drive cooler on the hot side to see what kind of benifit I get. If this works it would make for a fairly cheap and quiet chiller. Of course I doubt it will be power bill friendly. Not to mention long term use would require a dedicated TEC power supply.

And if not I got this 15K RPM SCSI drive that is hotter then the dam sun. It raised my case temp from 24 C to 41 C.

kronchev · 06-23-2004, 02:46 PM

Quote:

Originally Posted by Titan151

well yes, but will it work. I will have to find out.. I am off to the great EBAY! I think just to see for testing purposes I will put a fan based hard drive cooler on the hot side to see what kind of benifit I get. If this works it would make for a fairly cheap and quiet chiller. Of course I doubt it will be power bill friendly. Not to mention long term use would require a dedicated TEC power supply.

And if not I got this 15K RPM SCSI drive that is hotter then the dam sun. It raised my case temp from 24 C to 41 C.

hell if it works ill buy it off you. even if it is *ugh* koolance.

Titan151 · 06-23-2004, 03:38 PM

Doh!

Well upon closer inspection the item I was looking at was only some kind of overpriced cold plate with a bunch of thermal adhesive. Ack, Koolance stuff is always set up so wierd. I should have known better then to try and get anything from them. So now I will have to look for something else to use instead.

06-23-2004, 12:59 PM	#1
Titan151 Cooling Savant Join Date: Apr 2004 Location: Seattle Posts: 116	Something to do with all those left over parts! Hmmmm, So I am running low on projects to work on. I have a bunch of left over components that I wan't to mess with. I gots me this 175 watt TEC that I was thinking of putting between two of those cheap Koolance hard drive coolers. I have some copper that I could use for the cold plate and a PSU supply for testing purposes. I am thinking of buying two Hard drive coolers from ebay, and building me a tec, coldplate, Koolance sandwich. Then I can put 100 + pounds of wait on top. Top it off with a heaping helping of thermal paste for flavor). Then using my old via aqua hooked to the hot side and my rad which I don't use (I have a chiller). Then cycle the cool side through my maze 4 with the swifty pump. They sell those things on the ebay for 14 bucks. Not sure how good the flow pattern is on the inside. I imagine since it is Koolance they may not be anything more then a metal box with two outlets. So if I drop 30 bucks plus a bit on shipping I have a new project! Any input on this. __________________ Water Cooled AMD XP 4200 X2 Asus A8N-SLI Twin Raptors in Raid 0 Configuration 2 Gigs Corsair 3200 7800 GTX

06-23-2004, 01:55 PM	#2
kronchev Cooling Savant Join Date: Mar 2004 Location: Lawrenceville, NJ Posts: 254	im really confused on everything on that post. can you make a diagram? __________________ Ghetto riggin'!

06-23-2004, 02:26 PM	#4
kronchev Cooling Savant Join Date: Mar 2004 Location: Lawrenceville, NJ Posts: 254	ohhh so its a waterchiller go for it, should be cool __________________ Ghetto riggin'!

06-23-2004, 02:45 PM	#5
Titan151 Cooling Savant Join Date: Apr 2004 Location: Seattle Posts: 116	well yes, but will it work. I will have to find out.. I am off to the great EBAY! I think just to see for testing purposes I will put a fan based hard drive cooler on the hot side to see what kind of benifit I get. If this works it would make for a fairly cheap and quiet chiller. Of course I doubt it will be power bill friendly. Not to mention long term use would require a dedicated TEC power supply. And if not I got this 15K RPM SCSI drive that is hotter then the dam sun. It raised my case temp from 24 C to 41 C. __________________ Water Cooled AMD XP 4200 X2 Asus A8N-SLI Twin Raptors in Raid 0 Configuration 2 Gigs Corsair 3200 7800 GTX

06-23-2004, 03:38 PM	#7
Titan151 Cooling Savant Join Date: Apr 2004 Location: Seattle Posts: 116	Doh! Well upon closer inspection the item I was looking at was only some kind of overpriced cold plate with a bunch of thermal adhesive. Ack, Koolance stuff is always set up so wierd. I should have known better then to try and get anything from them. So now I will have to look for something else to use instead. __________________ Water Cooled AMD XP 4200 X2 Asus A8N-SLI Twin Raptors in Raid 0 Configuration 2 Gigs Corsair 3200 7800 GTX

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)