waterblock Clamp Needed

cinamon · 12-13-2000, 01:43 PM

I need a clamp that will give 1.5" of clearance above the SOCKET 370 cpu because I have block/peltier/coldplate sandwiched together and they are 1.5" in height. Any ideas where to get one that big? I ordered one with my poly block but it didn't come in the package and was wondering where to get one at?

------------------

Matt Simmons cinamon@graceba.net http://wwp.icq.com/38600739
Tech+ Certified www.abitcentral.com www.cinamonman.com

[This message has been edited by cinamon (edited 12-13-2000).]

Joe · 12-13-2000, 02:26 PM

if you have access to a drill you can make one by taking 3 peices of Aluminum ( thich peice at the top and 2 thin ones down the side drill them the proper places, annd bolt it all together. Ask Chip at OCWC, dunno if he has something that would work for ya.

and if he forgot the Clamp for your poly block, give him hell!

Highvoltagepc · 12-13-2000, 04:02 PM

Hey cinamon, "you got mail" about a clamp!

------------------
THUNDERBIRD 800@1010MHZ,WATERCOOLED
18 GIG SCSI,BLACK HX08 homepage www.highvoltagepc.com

Buster · 12-13-2000, 10:10 PM

man 1.5 inches is some thick components. If the guys in the previous post were not able to take care of you , shot me an email. I positive I can set you up with a clamp that will hold all this secure.

Buster

CU later · 12-18-2000, 08:27 PM

I made my own clamp out of a quick grip from home depot.

I know crappy picture..... cool clamp though.

Kevin · 12-23-2000, 04:25 PM

Apparently you made your own block too

Quote:

Originally posted by CU later:
I made my own clamp out of a quick grip from home depot.

CU later · 12-27-2000, 11:07 PM

Actually I've made several.

The one in the shot of the clamp is the best.

Most of the time my P3 600e stays in the 70's.

And it's at 984! 1.9V

Bose-Einstien Condensate · 12-30-2000, 03:22 AM

http://www.overclock-watercool.com has some nice ones(under hardware listing)

12-13-2000, 01:43 PM	#1
cinamon Cooling Neophyte Join Date: Dec 2000 Location: dothan, AL, USA Posts: 35	waterblock Clamp Needed I need a clamp that will give 1.5" of clearance above the SOCKET 370 cpu because I have block/peltier/coldplate sandwiched together and they are 1.5" in height. Any ideas where to get one that big? I ordered one with my poly block but it didn't come in the package and was wondering where to get one at? ------------------ Matt Simmons cinamon@graceba.net http://wwp.icq.com/38600739 Tech+ Certified www.abitcentral.com www.cinamonman.com [This message has been edited by cinamon (edited 12-13-2000).]

12-13-2000, 02:26 PM	#2
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	if you have access to a drill you can make one by taking 3 peices of Aluminum ( thich peice at the top and 2 thin ones down the side drill them the proper places, annd bolt it all together. Ask Chip at OCWC, dunno if he has something that would work for ya. and if he forgot the Clamp for your poly block, give him hell!

12-13-2000, 04:02 PM	#3
Highvoltagepc Cooling Neophyte Join Date: Nov 2000 Location: USA Posts: 50	Hey cinamon, "you got mail" about a clamp! ------------------ THUNDERBIRD 800@1010MHZ,WATERCOOLED 18 GIG SCSI,BLACK HX08 homepage www.highvoltagepc.com

12-13-2000, 10:10 PM	#4
Buster Cooling Neophyte Join Date: Nov 2000 Location: California Posts: 89	man 1.5 inches is some thick components. If the guys in the previous post were not able to take care of you , shot me an email. I positive I can set you up with a clamp that will hold all this secure. Buster

12-18-2000, 08:27 PM	#5
CU later Cooling Neophyte Join Date: Dec 2000 Location: waltham mass Posts: 20	I made my own clamp out of a quick grip from home depot. I know crappy picture..... cool clamp though.

12-27-2000, 11:07 PM	#7
CU later Cooling Neophyte Join Date: Dec 2000 Location: waltham mass Posts: 20	Actually I've made several. The one in the shot of the clamp is the best. Most of the time my P3 600e stays in the 70's. And it's at 984! 1.9V

12-30-2000, 03:22 AM	#8
Bose-Einstien Condensate Cooling Neophyte Join Date: Dec 2000 Location: Atlanta, Georgia Posts: 84	http://www.overclock-watercool.com has some nice ones(under hardware listing)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)