Rad cleaning

D0M1N8R · 07-07-2010, 09:12 PM

what are some recommended ways to clean/unclog a rads?

ben333 · 07-15-2010, 11:40 PM

I've heard many things, some people just use water, others suggest toilet bowl cleaner. If it's a regular rad, not clogged too bad then I'd recommend starting with vinegar. Pour some in, hold your fingers over the rad's fittings and slosh the vinegar around inside. Don't let it sit in there too long, it's good for getting rid of corrosion but can also eat the metals. After the vinegar, I'd probably make it a priority to thoroughly rinse the rad. After the vinegar, I myself add a little dish soap and let the tap water run as hot as it gets. I fill the rad up, leaving a little air left inside to increase the effect of shaking the soapy hot solution. After that I rinse a few times with hot water, washing out all metal bits and flux from the rad itself or other parts in your loop. Other crap should come out too. Rinse till the water coming out has no crap or bubbles in it, and you should have a pretty clean rad. If you used hot enough water, it should help the inside dry out faster too, still try to shake out all the water you can when done though. Some people rinse with distilled water, I'm not that paranoid though, knowing soon that the radiator will have clean water flowing through treated with a bit of antifreeze (in my case anyway) so a little bit of tap water left shouldn't matter too much. (Don't leave any cleaner in though!)

bmaverick · 03-01-2011, 06:19 PM

Well, vinegar isn't the right stuff if it's apple based. Your RAD will be growing organic nasties thereafter.

Distilled or white vinegar is the ideal stuff to use.

If the RAD is well clogged, some people have tried drain-o, toilet bowl cleaner and the like. I can not vouch for any of those myself. For RAD cleaning other than white vinegar, I've used automotive RAD flush products. The best tends to be Prestone Super Flush. The 22oz small bottle is about $5 and some change. Let it sit in the RAD overnight or for a few hours. Drain the flush into a bucket while using a coffee filter. Notice how much gunk is in the filter. If it's bad, re-run the filtered Super Flush through a second time.

When the RAD is flushed, rinse with distilled or RO filtered water.

07-07-2010, 09:12 PM	#1
D0M1N8R Cooling Neophyte Join Date: Jul 2010 Location: RI Posts: 1	Rad cleaning what are some recommended ways to clean/unclog a rads?

07-15-2010, 11:40 PM	#2
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Rad cleaning I've heard many things, some people just use water, others suggest toilet bowl cleaner. If it's a regular rad, not clogged too bad then I'd recommend starting with vinegar. Pour some in, hold your fingers over the rad's fittings and slosh the vinegar around inside. Don't let it sit in there too long, it's good for getting rid of corrosion but can also eat the metals. After the vinegar, I'd probably make it a priority to thoroughly rinse the rad. After the vinegar, I myself add a little dish soap and let the tap water run as hot as it gets. I fill the rad up, leaving a little air left inside to increase the effect of shaking the soapy hot solution. After that I rinse a few times with hot water, washing out all metal bits and flux from the rad itself or other parts in your loop. Other crap should come out too. Rinse till the water coming out has no crap or bubbles in it, and you should have a pretty clean rad. If you used hot enough water, it should help the inside dry out faster too, still try to shake out all the water you can when done though. Some people rinse with distilled water, I'm not that paranoid though, knowing soon that the radiator will have clean water flowing through treated with a bit of antifreeze (in my case anyway) so a little bit of tap water left shouldn't matter too much. (Don't leave any cleaner in though!) __________________ Pro Slacker

03-01-2011, 06:19 PM	#3
bmaverick Cooling Neophyte Join Date: Feb 2010 Location: USA Posts: 4	Re: Rad cleaning Well, vinegar isn't the right stuff if it's apple based. Your RAD will be growing organic nasties thereafter. Distilled or white vinegar is the ideal stuff to use. If the RAD is well clogged, some people have tried drain-o, toilet bowl cleaner and the like. I can not vouch for any of those myself. For RAD cleaning other than white vinegar, I've used automotive RAD flush products. The best tends to be Prestone Super Flush. The 22oz small bottle is about $5 and some change. Let it sit in the RAD overnight or for a few hours. Drain the flush into a bucket while using a coffee filter. Notice how much gunk is in the filter. If it's bad, re-run the filtered Super Flush through a second time. When the RAD is flushed, rinse with distilled or RO filtered water.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)