|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
Thread Tools |
06-07-2006, 10:16 PM | #1 |
Cooling Neophyte
Join Date: Jul 2004
Location: Stow, OH
Posts: 26
|
Will the orientation of this poly T work with this T-line? My radiator will be place
Will the orientation of this poly T work with this T-line? My radiator will be placed on the bottom of my stacker case and the barbs to the radiator will be to the front of the case. Due to my pump being close in proximity, I was thinking of setting it up as dipicted in the illustration. The short end of the poly t will be facing towards the pump inlet, and the other ends of the poly t will be right above the barb to the radiator. Sorry for the crude pic.
__________________
AMD System CoolerMaster Stacker STC-TO1 |AMD Athlon 64 4400+ X2@2.530MHz|ASUS A8N32-SLI Dekuxe|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6|Thermalright XP-90C|EVGA 7800GTX KO Edition |2 x 36.7GB WD Raptors(Raid 0)|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive|SB Audigy 2 ZS|OCZ Powerstream 520W|Vantec 305 Nexus Fan Controller|Mitsubishi Diamond Pro 930SB|Windows XP Pro w/SP2 |
06-08-2006, 02:59 AM | #2 |
Cooling Savant
Join Date: Jul 2005
Location: california
Posts: 429
|
Re: Will the orientation of this poly T work with this T-line? My radiator will be p
I wouldn't have the T in that direction because it will be restrictive due to 90 bend to pump and also the rad before the pump.
You will get better performance placing loop gpu>pump >rad> Tline> cpu >gpu. you can mount the rad standing up or mount pump on the mobo tray if you want to place rad on the floor above the vent. |
06-08-2006, 08:34 AM | #3 |
Cooling Savant
Join Date: Jun 2005
Location: Skokie, Illinois
Posts: 322
|
Re: Will the orientation of this poly T work with this T-line? My radiator will be p
Kind of like this:
__________________
My new rig.... Intel SE440BX-3, PIII 550 (@ 680) MX440 275/332 (@ 350/400) and 3DFX Voodo 5 5500 160/160 (@180/180) Two Opticals and 120 gigs (w/28gigs in RAID0) on 4 Maxstors |
06-08-2006, 08:21 PM | #4 |
Cooling Neophyte
Join Date: Jul 2004
Location: Stow, OH
Posts: 26
|
Re: Will the orientation of this poly T work with this T-line? My radiator will be p
well I came across this picture in some gallery and it is going to look just like my setup but I will be using one vid card with a maze 4.
__________________
AMD System CoolerMaster Stacker STC-TO1 |AMD Athlon 64 4400+ X2@2.530MHz|ASUS A8N32-SLI Dekuxe|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6|Thermalright XP-90C|EVGA 7800GTX KO Edition |2 x 36.7GB WD Raptors(Raid 0)|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive|SB Audigy 2 ZS|OCZ Powerstream 520W|Vantec 305 Nexus Fan Controller|Mitsubishi Diamond Pro 930SB|Windows XP Pro w/SP2 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|