Thread Specs

Breach · 04-20-2005, 02:32 PM

I didn't see anything addressing common size ratings on various types of threads on pipe fittings specifially, so I found a few links.

British and other sizes:
http://mdmetric.com/tech/thddat7.htm

And standard American:
http://mdmetric.com/tech/thdform3.htm

That site also has other national standards on it as well.

csimon · 11-02-2005, 08:24 AM

thanks ...just what I was looking for.

Brians256 · 11-02-2005, 12:57 PM

Glad we could help. This is what ProCooling is good at; we have a LOT of really good technical information about cooling (not just what is currently trendy).

csimon · 11-15-2005, 09:12 AM

So if the rad barb is 3/8" BSPT what would the ID be or is that the ID? Why does the PA160 only come in that one size and not use interchangeable barbs?
Oh nvm I answered my own question. That is the in/out size not the barb size ...I can still have 3/8 or 1/2 barbs on that rad.

Brians256 · 05-21-2007, 10:12 AM

Quote:

Originally Posted by csimon

So if the rad barb is 3/8" BSPT what would the ID be or is that the ID? Why does the PA160 only come in that one size and not use interchangeable barbs?
Oh nvm I answered my own question. That is the in/out size not the barb size ...I can still have 3/8 or 1/2 barbs on that rad.

If I am not mistaken, the size of a fitting is the OD of a male fitting and the ID of a female fitting. If threaded, it is the diameter of whatever surface has the threads.

04-20-2005, 02:32 PM	#1
Breach Cooling Neophyte Join Date: Mar 2005 Location: Washington Posts: 93	Thread Specs I didn't see anything addressing common size ratings on various types of threads on pipe fittings specifially, so I found a few links. British and other sizes: http://mdmetric.com/tech/thddat7.htm And standard American: http://mdmetric.com/tech/thdform3.htm That site also has other national standards on it as well.

11-15-2005, 09:12 AM	#4
csimon Cooling Neophyte Join Date: Apr 2005 Location: Acadiana Posts: 99	So if the rad barb is 3/8" BSPT what would the ID be or is that the ID? Why does the PA160 only come in that one size and not use interchangeable barbs? Oh nvm I answered my own question. That is the in/out size not the barb size ...I can still have 3/8 or 1/2 barbs on that rad. Last edited by csimon; 11-15-2005 at 09:24 AM.

11-02-2005, 08:24 AM	#2
csimon Cooling Neophyte Join Date: Apr 2005 Location: Acadiana Posts: 99	thanks ...just what I was looking for.

11-02-2005, 12:57 PM	#3
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Glad we could help. This is what ProCooling is good at; we have a LOT of really good technical information about cooling (not just what is currently trendy).

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)